cap

Sooner or later I guess I would have to drop it, been riding it across the mud and gravel, where they are digging up the drive and finally dropped it at about 5 MPH, coming out onto the road. R&G sliders scratched (but did the job), plus bar end,mirror and brake lever. Big downside is the end...

dudes , i have been looking at the 2 systems akra supply , am i correct in saying , the downpies are the same , the exhaust itself is the same , except for the end cap ? the lower level version has the end cap which is larger to house the baffle and the high level system , which has a smaller...

Hi all, new to the wonderful world of the mt09. I noticed under the rubber cap in the steering stem it has started to rust. I assume it's from the cap not letting the water drain properly. Has anyone else had this problem?

So after fitting my heated grips and having to remove the fairings, It seems i left a screw loose and it has rattled out! Its one the screws which are in front of the petrol cap on the left and right. Is there a spares website where i could purchase one? Cheers,

Hello, i want to powder coat some parts of the bike like mt07 motocage, but i want know if the protection (fig 1) in the image is plastic or alloy,and how difficult is to remove,the cap (fig2) is there any specific method to take it or is just pulling? cheers :o