wiring

Hi all , has anybody with a 2017 MT 09 fitted the genuine Yamaha high number plate hanger ? is there a section of wiring that is removed that runs along the swing arm ? cheers all ;)

Hi guys, I am mounting PDM60. I need to get 12V ignition trigger signal from somewhere under the seat - means I need 12V signal when bike ignition is ON only. Is there wiring diagram I can get from somewhere? I know there is 12V Aux in the front but it is too far away to get my wire there...

I would like to install a holder for my phone (not a Tomtom). It's a Samsung S6 Edge, not an iPhone, so I can't use Yamaha's holder. I am not looking for anything complicated or expensive but it needs to be decent quality and come with the relevant wiring. Can anyone recommend one? Thanks in...

£16 on Ebay got me the left hand switchgear from a Yamaha YZF R125. So, first problem . . . Comparing the wiring diagrams for the two bikes, most of the wires are matching, just two differences; - The horn wires are both different, but that's pretty clear on the wiring diagrams, so just...

...taking my bike apart! I've finally got round to fitting some of the parts I've bought over the past few months, including: Highsider Dakota lights, front and rear Replace flasher relay with Motogadget M-Wave Fuzeblock Bruudt Tail Tidy Removal of rear pegs Fitting DPM screen and rear hugger...

After fitting the rear rack i felt the tail light became to obstructed for other road users. I made up a bracket and extended the wiring loom 270mm and relocated the bracket under the back of the rack. Photo attached.

Went out to buy a Triumph Tiger XC . Just happened to stop off at a Yamaha dealers in Chorley. Saw the MT-09 and kicked the Triumph into touch. Hope I won't live to regret it. Small tank - uncomfortable seat - problems with cam chain tensioner and headlight wiring. Crap ECU mapping - will...

Just had my letter from Yamaha instructing me to contact my Yamaha dealer to get the head light recall fitted. It appears the wiring could be too short, resulting in the headlight connection being loosened by turning with full lock on. 3 days to order the parts and its now booked in for next...

I was browsing the Yamaha International sites (looking for someone to contact regarding the ecu remap), and reached the Yamaha Motors Japan site. My Japanese isn't too great, but thanks to Google Translate it seems that there is a new recall regarding the headlight wiring. I actually read...

I replaced the rear indicators with Yamaha LED ones and the connectors din't match the bikes wiring - I assume the front ones are the same, bullet connectors on the new indicators but a single connector on the bikes wiring? Also as I have the inline resistors on the rear indicators I don't need...