CO Adjustment on 2009+ Yamaha VMAX - YouTube this is on a Vmax although procedure is the same for all yamahas![]()
Thanks GC
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
CO Adjustment on 2009+ Yamaha VMAX - YouTube this is on a Vmax although procedure is the same for all yamahas![]()
Hi , Not sure if this adjustment can be carried out on FZ 09 s but with MTs and all Euro Yamahas for that matter the CO or Fuel mixtures can be adjusted through the instrument cluster , they are limited but can adjusted none the less , i have adjusted mine 10 digits above standard and has smoothed the throttle snatch in standard mode completely and has made the throttle snatch or off/ on throttle application only slightly noticable in A mode , for those that dont know , there are U tube clips how to change , or search CO Adjustment , i believe for US bikes they need a jumper wire to perform , i eventually settled on 15 digits above standard which my factory settings were 0 for all 3 cylinders , if anyone has access to a gas analyzer it would be great to know what the idle mixtures are when changing settings as the setting range is between -128 and + 126 , cheers
Can you confirm that in the diagnostic mode CO adjustment,that you have C1,C2 & C3 options?
I ask because I have done some research on other Yamaha forums and it appears that different models have different adjustments.On some models like the R1 and R6 they have C1,C2,C3 & C4 and the adjustment alters the fuel/air mixture for each cylinder over the whole rev range.Another model (FZ6)? there is only C1 & C2 and they change the mixture for cylinders 1&4 and 2&3 respectively over the whole rev range.Then another model has C1,C2,C3 & C4 and those alter the mixture for all the cylinders together but each applies to a different rev band/throttle position combination.
It will be interesting to see which of these options the FZ/MT uses.
Edit : actually the FZ6 C1 & C2 changes the mixture for two rev bands on all the cylinders eg. high revs and low revs
It's strange, isn't it?
Some people goes on about a snatchy throttle. I can't find out if people are ûber-sensitive about it.
My MT runs as fun as possible. Yes, I do need to know my throttle, but like brakes, seats, handles whatever, and no matter if it is a car or a bike, you always have to get used to it.
I'm not nagging over mine - I think it behaves as it should - naughty and full of power, quick to respond when ever the lid goes down....
I just love the bloody bike!![]()