Rear view Mirror

[Nuggets]

this was the first modification I did, even before having the bike I hard the risers ready for it's delivery the poor visibility was picked up in several of the press reviews.

I used the extenders which I bought from the link below then used 50mm heat shrink tubing to match them in with the bike (picture below), I much preferred the mirrors to be extended out rather than using the R&G off-sets. The extenders here are pretty good quality, only one of them has a very slightly eccentric hole but not enough it caused a problem (I'm being pedantic!)

Yamaha MT07, MT09,YP400,XJR,XT,Tenere etc Mirror Extenders x 2 (10MM THREAD) | eBay

View attachment 1287

 

[dacreative]

and30ers
Thank you very much,
For the bar end weights problem is it worthy to place these ?
Renthal Bar End Plugs

 

[dacreative]

Hey Nuggets these extenders looks very effective. i'm totally agreed with you, they are more good looking than R&G model.
Thanks i'll make a try before digging in handlebar changing

 

[Nuggets]

Hey Nuggets these extenders looks very effective. i'm totally agreed with you, they are more good looking than R&G model.
Thanks i'll make a try before digging in handlebar changing

They work for me - I'm 5'9" and "chunky" (ahem) before I put these on I only got a view of my arms and had to physically move body position or lift my left arm to see behind. These extend mirrors by 40mm which is perfect, not too wide although he mirrors are marginally wider than the handle bars now.

 

[Deleted member 20]

Stock weights are threaded and does not fit Renthal alu bars. You need some other solution like with expander fastner, or you could try to thread tap the Renthal bar to accomodate Yamaha bar end weights. Just riding without anything feels strange, weights or hand guards feels better for me. I got some LighTech plugs for my TDM.
https://www.google.se/search?q=Ligh...OIf5ygP4p4G4BQ&ved=0CDcQsAQ&biw=1920&bih=1113

 

[robodene]

Nippy Norman do up-and-out risers for Yams. Great on my TDM and now on my MT-03. The left hand thread is dealt with.

 

[dacreative]

Thanks i'll make a look

 

[MrSquidbeak]

Has anyone changed there mirrors altogether for different ones?
That is what i was thinking off just wanted to see some pictures first

 

[da1kini]

Has anyone changed there mirrors altogether for different ones?
That is what i was thinking off just wanted to see some pictures first

Not yet, but when I do it gonna be these

Accessori Yamaha MT07 2014 pezzi in alluminio ricavati dal pieno made in Italy by deprettomoto.com - deprettomoto.com

 

[S2VML]

Changed mine to these. I think it suits the bike but vibrates more than the stock one !!

 

[Antony_Mavromichalis]

I I have the R&g extenders on mine and now I can see and most importantly filter a lot better because now the mirrors are above the car mirrors

http://www.rg-racing.com/browseBike/Yamaha/MT-07/2014_onwards/MR0003BK.aspx


Sent from my iPhone using Tapatalk

 

[da1kini]

I I have the R&g extenders on mine and now I can see and most importantly filter a lot better because now the mirrors are above the car mirrors

http://www.rg-racing.com/browseBike/Yamaha/MT-07/2014_onwards/MR0003BK.aspx


Sent from my iPhone using Tapatalk

Great!

How is the akra with db-killer installed? if the stock is 2 out of a scale in 1-10 where 10 is loud as hell(to loud for human ears) the akra is?

 

[Antony_Mavromichalis]

Akra is 5 but sound is better not only louder .also the torque difference is substantial


Sent from my iPhone using Tapatalk

 

[da1kini]

Akra is 5 but sound is better not only louder .also the torque difference is substantial


Sent from my iPhone using Tapatalk

Great! thats all I need to hear!