Like Ralph said, but a complete list bellow just so you don't forget anything
- Check fuel hoses for crack or damage
- Spark plugs, check condition, clean and regap
- Fuel injection system, Adjust synchronization
- Air filter check hose, clean
- Clutch, check operation, adjust
- Front/Rear break, Check operation, fluid level and leakage, replace pads if needed
- Brake hoses, check for cracks or damage, correct routing and clamping, replace every 4 years
- Brake fluid, replace every 2 years
- Wheels, check runout and damage
- Tires, check tread depth and damage, pressure, replace if necessary
- Wheel bearings, check bearing for looseness or damage
- Swingarm, check operation and excessive play
- Steering bearings, check bearing play and roughness
- Chasis fasteners, make sure all nuts, bolts and screws are properly tightened
- Brake lever pivot shaft, lubricate with silicone
- Brake pedal pivot shaft, lubricate with lithium-soap based grease
- Clutch lever pivot shaft, lubricate with lithium-soap based grease
- Sidestand, check operation, lubricate with lithium-soap based grease
- Sidestand switch, check operation
- Front fork, check operation and oil leakage
- Shock absorber assembly, check operation and oil leakage
- Rear suspension relay arm and connecting arm pivoting points, check operation
- Engine oil, change, check level and leakage
- Cooling system, check coolant level and leakage
- Front and rear brake switches, check operation
- Moving parts and cables, lubricate
- Throttle grip, check operation, free play and adjusts, lubricate cables and housing
- Lights, signals and switches, check operation, adjust headlight beam
Not sure if Peter is still around to share the service manual, but you can try asking him anyway and wait a few days.
http://www.motorcycle-talk.net/foru.../777-workshop-manual-post15578.html#post15578
