• Welcome to the Yamaha MT-09 / FZ-09 Forums. Member registration disables ads and allows you to post and share. Register Here.

Error code 69 MT09 Tracer 2015


M

mrmortar

0
Joined
Jul 15, 2015
Messages
36
Hi All,
I fired up my MT09 this afternoon, not used for a few weeks. Let it warm up, ran it through the gears slowly as have done many times before whilst on the center stand (never had a problem). It flashed up with a 69 error code. This re-appears on the display when turning the bike off.

Is this anything I should be worried about and how on earth can I clear it without workshop tools?
 
It looks like the same thing I did on my Tracer 900, the back wheel is being driven through the gears whilst the front wheel is stationary

You will need a diagnostic tool to clear it
 
If you have an older model i think you can delete the error using the menu on the clocks
 
As it happens, i rode off and it resolved itself. However, I did get hold of an ODBII cable and scanner but it doesn't want to recognize the ECU in this bike.
 
As it was eluded too on a previous post I managed to access the diags mode on this bike.
Does anyone know what all the read outs mean?
 
You must log in or register to reply here.


Back
Top